Switching Off The Weighing Function; Temperature Display - Silvercrest Z31183 Instrucciones De Utilización Y De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Press the T-SET button
twice in the weighing mode. A bell-symbol appears in the
LC display
5
Note: You can set the time period precisely to the second.
Press and hold the ▲ Z / T button
so that the time readout in the LC display runs faster.
Press the ▲ Z / T button or ▼ UNIT button to set the time in
10 minute intervals.
Press the T-SET button once. Press the ▲ Z / T button or
▼ UNIT button to set the time in 1 minute intervals.
Press the T-SET button once. Press the ▲ Z / T button or
▼ UNIT button to set the time in 10 second intervals.
Press the T-SET button once. Press the ▲ Z / T button or
▼ UNIT button in set time in 1 second intervals.
Press the T-SET button to start the countdown.
Note: You can reset the timer. To do this press the T-SET
button.
A signal sounds as soon as set time period has elapsed.
Press any button to switch off the signal.

Switching off the weighing function

Note: If the appliance has not been used for about 2 minutes,
it switches automatically to the time mode.
Press the ON / OFF button
time mode.

Temperature display

The temperature is shown in °C in the lower left of the
LC display
.
5
once in the clock mode or
4
.
3
or ▼ UNIT button
7
to return manually to the
GB/MT
,
6
47

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido