Olympus DS-7000 Manual De Instrucciones página 14

Device Menu
Card Select:
By default, the recording media is set
to [ SD Card ] by the manufacturer.
• The recording media ([
will appear on the display.
Cue/Rev:
The playback sound of Cue and
Review operation and Cue and
Review speed can be set.
1 Select [ Sound ] or [ Speed ].
[ Sound ]:
Set the playback sound of Cue
and Review to On or Off.
[ Speed ]:
Set the Cue and Review speed.
2 Select the options.
When [Sound] is selected:
[ On ]:
Activate the playback sound of
Cue and Review.
[ Off ]:
Disables this function.
When [Speed] is selected:
You can adjust the Cue and
Review speed level from
[ Speed 1 ] to [ Speed 5 ].
• Cue and Review speed level
becomes faster as the numerical
value becomes larger.
Power Save:
By default, the recorder will enter
into Power Save mode if not used for
more than 10 minutes.
[ 5minutes ] [ 10minutes ] [ 30minutes ]
[ 1hour ]:
Set the length of time before the
recorder will enter into Power Save
mode.
[ Off ]: Disables this function.
• If any button is pressed, time count
will restart.
Time & Date:
Setting the time and date beforehand
enables easier file management.
For details, see " Setting time and
date [Time & Date] ".
14
USB Class:
You can set the USB class of this
recorder with a USB connection to
[ Composite ] or [ Storage Class ].
[ Composite ]:
In the 3 classes of Storage, USB
] or [ ])
audio and human interface device,
USB connection is possible. While
connected via USB in [ Composite ],
the recorder can be used as the USB
speaker and the USB microphone in
addition to storage class.
[ Storage Class ]:
USB connection is possible in only
storage class.
Reset Settings:
To reset the menu settings to their
default values use [ Reset Settings ]
under [ Device Menu ].
Format:
Cards that have been used in non-
Olympus devices, or cards that are
not recognized by the recorder, must
be formatted before they can be used
with the recorder.
• Formatting the card will erase all
the stored data, including locked
files.
For details, see " Formatting the card
[Format] ".
Card Information:
Memory card capacity and remaining
card space for the cards in use will be
displayed on the recorder.
System Information:
System information about the
recorder like the [ Model ], [ Version ]
and [ Serial No. ] can be displayed.
• For further details, a complete
advanced version of the manual *
(PDF format) is available for
download at the OLYMPUS website.
* Available in English, French or
German.
Formatting the card [Format]
Cards that have been used in non-
Olympus devices, or cards that are
not recognized by the recorder, must
be formatted before they can be used
with the recorder.
1 Select [ Format ] at the [ Device
Menu ] screen, then press the
OK/MENU button.
2 Press the + or – button to select
[ SD Card ] or [ microSD Card ],
then press the OK/MENU button.
3 Press the + or – button to select
[ Start ] option.
4 Press the OK/MENU button to
confirm [ Start ] selection.