Technical Specifications - Rupes S130 L Instrucciones Original De Uso Y Manutención

TECHNICAL SPECIFICATIONS

OPERATING VOLTAGE AND FREQUENCY
POWER
POWER AT SOCKET (MAX)
TOTAL POWER (MAX)
AIR CAPACITY EN 60335-2-69
VACUUM LEVEL
WEIGHT
DIMENSIONS
CLASS OF PROTECTION
NOISE LEVEL EN 60704-3
FILTERS SURFACES
CAPACITY OF DUST COLLECTION BAG
CONTAINER CAPACITY
POWER CONTROL SWITCH
PNEUMATIC SECTION
INLET AIR PRESSURE
MAX COMPRESSED AIR FLOW
INLET FITTING
PARTS OF THE TOOL
1 - Vacuum head
2 - Tool tray
3 - Handle
4 - Identification plate
5 - Compressed air inlet (VERSION "P")
6 - Air coupling filter (VERSION "P")
7 - Power cord
8 - Cooling air inlet
9 - Cooling air outlet
10 - Operating air outlet
11 - Head lockers
12 - Man-0-Aut switch with speed control
13 - Motor ON indicator
14 - Liquid level indicator (VERSION "E")
15 - Service indicator
16 - Electric tool socket
17 - Quick coupling for pneumatic tool (VERSION "P")
18 - Pneumatic tool connection
19 - Electric tool hose
20 - Pneumatic tool hose (optional)
21 - Filter frame
22 - Filter frames lockers
23 - Filters (paper or polyester)
24 - Liquid level sensor (VERSION "E")
25 - Dust bin
26 - Accessories compartment (VERSION 45 l)
27 - Antistatic connection
28 - Hose nozzle
29 - Universal swivelling nozzle
30 - Dust collection bag (paper or plastic)
31 - Castor wheels with lock
32 - Suction hose setting (VERSION "M")
33 - Rubber cap (VERSION "M")
230 Vac - 50/60 Hz
JP 100 Vac - 50/60Hz
1200 W
JP 1050 W (@min.500 W)
EU 2400 W
UK 1800 W
CH-DK 1100 W
AUS 1200 W
JP 380 W (@min.930 W)
UK 110 W
EU 3600 W
UK 3000 W
CH-DK 2300 W
AUS 2400 W
JP 1430 W
UK 110 W
165 m 3 /h
215 hPa
10,2 kg (S130)
13,5 kg (S145)
cm 43 x 42,5 x h 51 (S130)
cm 47 x 45 x h 63,5 (S145)
IP X 4
70 dB(A) - 73 dB (A) VERSION "E"
2 x 0,50 m 2
kg 5 max
30 l (S130)
45 l (S145)
MAN - O - AUT
VERSION "P"
6 bar
1450 l/min
3/8" G female
START-UP
Power supply
- Turn the main switch (12) to "O" (off) before connecting this appliance to the supply mains;
- supply mains voltage and frequency must match the identification plate;
- connect to power socket outlets provided with earth conductor and adequate protections.
Compressed air mains
- Do not exceed 6 bar;
- dehumidified and filtered air required;
- connect the appliance to the compressed air main with an hose suitable for the air pressure
and int. diam. 10 mm min.
Assembling the swivelling adaptor (29)
Insert the adaptor in the inlet nozzle (28).
Electrical tool connections
- Check for the tool switch turned off before connecting it to the front panel socket outlet;
- insert the tool plug into the front panel socket (16) (pic. 3);
- connect the tool to the swivelling nozze with the hose (19) (pic. 5);
- do not plug electric tools exceeding the power indicated on the front panel.
Pneumatic tool connections
- Check for the tool switch turned off before connecting it to the front panel quick coupling;
- connect the tool to the appliance with the quick couplings (17) (pic. 4) and (18) (pic. 6);
- connect the coaxial hose (optional) to the quick coupling (20) (pic.6).
Check the tool functioning as indicated on their instructions manual.
Preliminary checks
- Check that the dust collection bag (30) has been fitted in the container (25) and that the
filters (23) have been fitted on the head;
- check that the vacuum hose is properly fixed and does not hinder tool movement;
- check that there are no leaks in the compressed air supply system.
10