Columbus AKS 80 Manual De Instrucciones página 21

Barredoras aspiradoras
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Vacuum sweeper
AKS 80|BM 108
Detail 1 This is used to make the suction filters vibrate electrically (to clean them), by means of an electric vibrator; it must be
pressed at least 6/7 times for 8/10 seconds every time (this procedure must be carried out before operating the machine, before
emptying out the debris hopper and the motor must be off).
HORN BUTTON:
Detail 2 Press this button to sound the horn (Klaxon).
WORK LIGHT SWITCH:
Detail 3 This is used to turn the work lights on.
BATTERY LEVEL INDICATOR LIGHT:
Detail 4 This indicates the battery level and is represented by three coloured lights (red, yellow and green); by turning the
ignition key Detail 6, the LEDs turn on in the following order: red - yellow - green; wait for the green light to come on
before going into forward drive (or reverse). When the red LED comes on, it is necessary to charge the batteries.
_________________________________________________________________________________________
IT IS ADVISABLE NOT TO WAIT FOR THE RED LED TO COME ON TO RECHARGE THE BATTERIES, BUT
TO CHARGE THE BATTERIES WHEN THE INITIAL YELLOW LED COMES ON.
___________________________________________________________________________________________
HOUR METER:
Detail 5 An instrument that displays the number of hours of work carried out by the machine.
IGNITION KEY:
Detail 6 This switches on the entire control panel, especially the potentiometer, for driving; it is possible to drive without
working.
GEAR SHIFT:
Detail 7 The gear selector lever is used to make the machine travel forwards or in reverse. When the selector is in the forward
drive position (in the direction of the forwards arrow). By pressing the pedal Detail 3 Fig. 7 the machine will travel forwards.
Vice versa, when the selector lever is in the back position, by pressing the pedal the machine will travel in reverse. For safety
reasons, the speed of the machine in reverse drive is much slower. By leaving the selector in the central position, the
machine will not go into forward or reverse drive.
WORK STATION:
The work station must be occupied by the operator during machine operation, and is illustrated in Fig. 12.
IMPORTANT: For safety reasons, the machine switches off automatically when the operator gets off of the driver's
EMERGENCY STOP:
Press the red button located to the left of the operator Detail 1 Fig. 12/A; as they are no longer powered, all of the motors will
immediately stop.
DEFINITION: Residual risks that cannot be eliminated are all of those risks that, for several reasons, cannot be removed,
and for each one we provide the instructions to operate in maximum safety.
The risk of injury to hands, body and eyesight, by operating the machine without using safety protections correctly
assembled and fully intact.
CHAP. 8 – WORK STATION AND EMERGENCY STOP
seat or if the main hood is opened or not completely closed.
CHAP. 9 – SAFETY RULES
OUTSTANDING RISKS WHICH CANNOT BE ELIMINATED
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bm 108

Tabla de contenido