3. Close the lid on the mixing container by turning, until the triangle on the lid is
aligned with the triangle on the container.
4. Double-click the „Start-Stop button" on the lid twice to start the device. Turn the
product upside down and hold it in the hand. During the mixing, it helps to shake
the mixer from side to side for a better mixing effect. The mixing process will take
40 sec. and will stop automatically.
⋅
For stopping during the working process, click the „Start-Stop button" once.
⋅
If the blades are stuck at the start, the product can be placed upright and then
placed upside down after normal start.
Push 2x
5. After mixing the device needs to be turned around, so that the lid is on top again.
Wait some seconds, so that the juice can fl ow back into the mixing container. Then,
the lid needs to be unscrewed from the mixing container, and the juice in the cup
can be directly drunk or poured into a glass.
6. Charging of the blender:
The charging wire needs to be inserted into the battery charger provided, and the
magnetic suction head of the charging wire needs to be sucked on the charging
stand of the main engine to charge the product. When charging, put the mixing
container fl at on the table to charge. When charging, the indicator is red, and after
charging is completed, the indicator turns white. During charging, the product
cannot work.
14
Cleaning and care
1. Make sure the blades stopped running before opening the device and cleaning it.
2. Lid with motor and blade unit can be wiped with a damp cloth; do not, soak in
water or other liquids to avoid damage to the device.
3. Fast Cleaning: Add appropriate amount of water to the juice cup and install the lid.
Double-click the Start-Stop button and work for 5 to 10 seconds.
4. When storing, please ensure that the product is clean, dry and placed in a dry,
ventilated place without direct sunlight.
Dishwasher safe
Mixing Container
Lid with blade unit
and motor
Can be rinsed
Wipe with a
under running
damp cloth
water
15