Important Notes; If You Encounter Aproblem - Thermador 9000411578 Manual Del Usuario

IMPORTANT NOTES

K The Instructions for Use apply to several
versions of this appliance. Accordingly,
you may find descriptions of individual
features that do not apply to your
specific appliance.
K This hood complies with all relevant
safety regulations.
Repairs should be carried out by
qualified technicians only.
CAUTION
Improper repairs may put the user at
considerable risk.
K Before using your appliance for the first
time, please read these Instructions for
Use carefully. They contain important
information concerning your personal
safety as well as on use and care of the
appliance.
K Please retain the operating and
installation instructions for a subsequent
owner.
K Remove the packaging from the
appliance and dispose of it properly.
Pay attention to the fact that there are
accessories in the packaging. Keep
packaging elements out of the reach of
children!
K Thoroughly clean the appliance before
using it for the first time.
K Before operating the appliance for the
first time, check that the mains
connection is in proper working order.
6
IF YOU ENCOUNTER A
PROBLEM
In the event of malfunctions, first of all
check the household fuses. If the problem
has nothing to do with the power supply,
please contact your specialist dealer or your
local after-sales service.
If it is not possible to operate the extractor
hood:
Disconnect the extractor hood from the
mains electricity supply by pulling out the
plug or switching it off at the main fuse box.
Wait for approx. 1 minute and then switch it
on again.
If you have any questions or if a fault
occurs, please call Customer Service.
When you call, please quote the following:
E-Nr.
Enter the relevant numbers into the box
above. The E-Nr. (product no.) and FD
(production date) are shown on the
nameplate which can be seen inside the
extractor hood after the filter frame has
been detached.
The manufacturer of the extractor hoods
accepts no liability for complaints which can
be attributed to the design and layout of the
ductwork.
FD