Throttle - General Motors ARIV MELD Manual De Instrucciones

c. Throttle
There are 4 levels of pedal assist. These can be selected using the "+/-" controls on the throttle (or the APP). Assist
level will be indicated by the number of indicator lights shown on the display and on the app. One light is the lowest assist
level and 4 lights is the highest. When no assist level indicator lights are lit you will have no power assist but can continue
to ride your bike like you would a normal bike.
The red button has two different functions depending on which region you are in;
North America - The red button is the throttle. The ARĪV eBike can be used as a pedal assist or throttle only. Pushing
the red button provides power to the motor moving the bike forward without pedaling. Release the button and you can
continue to pedal the bike at the original assist level. The bike must be travelling at least 3 km/h (1.9 mph) before the
throttle will work and you must be in one of the assist modes.
Europe and Australia/New Zealand - The red button provides walk assist. Begin by walking with your bike. Hold the "+"
button down for 3 seconds. Walk mode is now enabled and is indicated by the flashing 4 white indicator lights on the
display. When holding down the red button the motor will provide power at 5 km/h (3 mph) making it easier to walk your
bike (such as up a hill). Holding the "–" button for 3 seconds turns off the walk assist. You will then have to re-select your
assistance mode if you are continuing your ride.
Walk Mode
When in walk mode (European Union and Australia/New Zealand only) the 4 leds will flash white (see details on "walk
mode" later in the manual).
8
EN