Sleep Timer; Control Lockout - Dimplex XLF50 Manual De Instrucciones

Ocultar thumbs Ver también para XLF50:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation (continued)
J.

Sleep Timer

The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30
minutes to 8 hours).
To set the timer press the
timer button on the remote,
repeatedly, until the desired
time is displayed.
• The Display will display the
different times as it is adjusted.
Once the timer has begun,
pressing the
display the time remaining
before the unit turns Off.
! NOTE: The Sleep Timer can
be cancelled at any time
by pressing the
repeatedly until the sleep timer
displays nothing.

Control Lockout

Pressing the T- and Brightness
buttons at the same time and
holding them for 2 seconds will lock
(
will be displayed) or unlock
LOC
(
will be displayed) the manual
U L
controls on the fireplace.
22
button will
button
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
whole unit off and it will not come
back on without being reset. If the
button on the unit is pressed,
Er2 will be displayed on the unit.
It can be reset by turning the unit
off at the main disconnect panel
and waiting 5 minutes before
turning the unit back on.
CAUTION: If you need to
continuously reset the heater,
turn the unit off at the main
disconnect panel and call
technical support at:
1-888-346-7539.
www.dimplex.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xlf60Xlf74Xlf100

Tabla de contenido