Sleep Timer - Dimplex DFR2651L El Manual Del Propietario

Operation
holding for 2 seconds will disable
and enable the heater.
! NOTE: When the heater has
been disabled and either the
or the is pressed the On
Screen Display will indicate "--".
F. Color Themes
Different presets of ambient
lighting color combinations
contained in the unit.
→ Changed by repeatedly
pressing the corresponding
button on the remote or the
unit.
• Cycles through the different
preset ambient lighting settings
of the unit, this includes
different combinations of
colours of the flame and media
lighting (if applicable).
! NOTE: The sixth theme of
the cycle is a prism where the
unit cycles through a variety of
colours. Pressing the
stops the cycling and holds
the unit on the preferred color,
indicated by a solid circle. When
the unit is on prism, and is cycling
through the colours, a rotating
circle will be displayed.
G.
Changes the brightness of the
lights in the unit.
→ Adjusted by repeatedly
• Indicated by the second digit
H.
The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30
minutes to 8 hours).
→ To set the timer press the timer
• The On Screen Display will
button
! NOTE: The Sleep Timer can
be cancelled at any time by
pressing the
until the sleep timer displays
nothing.
Brightness
pressing the corresponding
button on the remote.
on the Floating Display™
changing to show: "H" (high),
and "L" (low).

Sleep Timer

button on either the remote or
the unit, repeatedly, until the
desired time is displayed.
display the different times as it
is adjusted. Once the timer has
begun, pressing the
will display the time remaining
before the unit turns Off.
button
button repeatedly
11