Gewiss JOINON Parking+ Manual De Instalacion Y Uso página 22

Gewiss
2. To install the JP1 jumper in the end stations, access its control card. On these stations uninstall the six
bolts indicated in the following figure and remove the front.
3. Install JP1 jumper on the control card of the end charging stations.
J P 1
Jumper JP1 uninstalled (intermediate stations)
22
J P 1
Jumper JP1 installed (stations at the two ends)
ABA2022IQM01_ - 7.55.4.413.0 - Installation and Operation Manual
Communication accessories