Reactivating The Airbag System After Inflation - Helite E-TURTLE AIR Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
26
CAUTION
The use of the fork sensor is not recommended with the use of non-approved
accessories (exhaust pipe) and on a non-approved motorcycle. Some motorcycles
prepared only for the race track may exceed a too high vibration threshold and
mislead the sensor.
C. PRECAUTIONS BEFORE USING THE AIRBAG SYSTEM
If one of these conditions is not validated, you may not be protected
properly.
The vest is adjusted correctly to your size.
The e-cartridge must be new and properly connected to the system.
The vest is properly closed.
The vest is sufficiently charged (green LED on).
The fork sensor is recognized by the vest (version with fork sensor).
The green LED is on and flashes.

4. Reactivating the airbag system after inflation

After inflation, you need to reactivate the airbag system. Only replace the e-cartridge by
a Helite branded e-cartridge of the same capacity.
1. Get access to the e-cartridge (zip or velcro).
2. Remove the empty e-cartridge.
y a) Disconnect the e-cartridge.
y b) Unscrew the e-cartridge.
1
User Guide
1
!
For steps 2 to
5 the vest must
always be
switched off.
4
2
5

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

E-gp air

Tabla de contenido