Shutting Down The Unit; Process For Shutting Down The Unit - Gewiss JOINON Home Manual De Instalacion Y Uso

Shutting down the unit

10. Shutting down the unit
This section describes the procedure to shut down the unit. If it is necessary to carry out work on the unit interior
(qualified personnel only) these instructions must be followed in the same order shown here to remove the voltage.

10.1. Process for shutting down the unit

The station shuts down when the power supply is disconnected.
ABA2023IQM01_ - 7.55.4.412.2 - Installation and Operation Manual
Gewiss
EN
ES
FR
IT
35