Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.2.4 Returning to the previously selected programme
Press the EXIT button on the remote control to return to the previously selected
>
programme.
>
Press this button once more to return to the programme that you were just
watching.
5.2.5 Accessing blocked programmes
When you select a programme that is blocked by the child lock, the PIN message will
appear on the screen.
Use the number buttonsto enter your PIN code.
>
The desired programme is then displayed.
For ease of use, you are only required to enter your PIN code once during each
viewing session.
5.2.6 Switching between TV and radio
In DVB mode, you have the option of playing both TV and radio programmes.
Please note that the availability of particular DVB-T radio programmes depends on your
location.
Switch to radio mode by pressing the TV/Radio button on the TV set.
>
The TV set switches to the last radio programme that you had listened to.
Press the TV/Radio button again to tune in the last TV programme that you had
>
viewed.
5.2.7 Receiving encrypted programmes
Your TV set is equipped with a "Common Interface" to accommodate the use of a CI mod-
ule. This allows you to view encrypted programmes. To do this, you must first insert a CI
module with a valid smart card into the appropriate slot.
>
Insert the smart card into the card slot of the CI module. Before doing so, make
sure that the gold chip on the smart card is located on the top of the module in the
direction in which the card is inserted.
>
Insert the CI module into the slot. Make sure that the top of the module is facing
the LCD panel.
If you now select an encrypted programme, your television will automatically check the CI
slot and display the programme in unencrypted form, provided the appropriate CI module,
including a valid smart card, for this programme is inserted in the slot.
15
Publicidad
Tabla de contenido
