TechniSat TechniVision 22 ST Manual De Instrucciones página 19

5.7 Freeze frame
Please note that this function is available for digital programmes only. Your TV set must
be in DVB mode in order to use this function. To switch the remote control to DVB mode,
press the Digital button.
Press the STOP button to display the current freeze frame image.
>
The sound will continue to play normally.
> Press this button once again to continue normal playback of the TV picture.
6 TV settings
Please note that the remote control must be in TV mode in order to display and change
the TV settings. To switch the remote control to TV mode, press the TV button.
Please note that the number of menu entries and the availability of certain menus are
dependent upon the AV source you have chosen.
6.1 Displaying the TV menu
Press the MENU button to display the TV main menu.
>
Use the right/left arrow buttons to select the menu that you would like to
>
display.
Press the up arrow button to open the selected menu.
>
You can now use this menu.
6.2 Exiting the TV menu
> Once you have made the desired settings for a particular menu or menu item, you
can exit the menu by pressing the MENU button.
Your settings are saved automatically and the display switches to the next highest
menu level.
Press the MENU button while the TV main menu is displayed to return to
>
Normal mode.
for DVB mode only
19