Fein GRIT GIXBE Manual De Instrucciones página 8

3 94 10 008 000 - Buch Seite 8 Dienstag, 8. August 2006 2:25 14
EN
Symbols, abbreviations and
terms used.
The symbols used in this Instruction Manual and
possibly on the undercarriage, serve to draw
your attention to possible hazards when work-
ing with the undercarriage.
Symbol Term, meaning
Action
Read documentation
General mandatory sign
Danger warning
Screw
Screw, metric
Anchor
European conformity symbol
For your safety.
Do not use this undercarriage before you
have thoroughly read and completely
understood this Instruction Manual, including
the figures, specifications and safety regulations.
Read and observe the Instruction Manual
of the machine which is to be mounted on
this undercarriage.
Please also observe the relevant national
industrial safety regulations (e.g. in Germany:
BGV A2, BGR 500).
Non-observance of the safety instructions can
lead to an electric shock, fire and/or severe inju-
ries.
This Instruction Manual should be kept for later
use and enclosed with the machine, should it be
passed on or sold.
8
Make sure that the undercarriage stands securely
and has a level setup position. Fasten the under-
carriage to the ground. If the undercarriage tips
over during operation, serious injuries can
result.
Use appropriate fastening material when mount-
ing the machine to the undercarriage. When
mounted incorrectly, the machine can come
loose from the undercarriage and cause serious
accidents.
GIXBE:
The mains plug of the extraction system may be
mounted only by a qualified electrician. The pro-
tective conductor in the mains socket outlet
must be connected with the protective earthing
of the mains supply.
Pull out the mains plug for maintenance and
repair! Switching on the extraction system unin-
tentionally can lead to an electric shock.
Have the electrical safety of the extraction system
checked regularly in accordance with statutory
regulations. For systems that have not been
checked, there may be danger of electrical
shock!
At a glance.
1 On/Off switch
2 Support
3 Hose clamp
4 Extraction hose
5 Lock
6 Door
7 Frame
8 Filter insert (fine filter)
9 Filter insert (coarse filter)
10 Collection receptacle
11 Clamping screws
12 Fastening screws
Intended use of the machine.
The undercarriage is intended for stationary
mounting of GRIT GI 100, GIE, GXE belt grind-
ers.
GIXS/GIXBE