Adjusting The Slicing Thickness; Installing The Reversible Shredding Disc - KitchenAid KFP0722 Instrucciones

ASSEMBLING THE FOOD PROCESSOR

Adjusting the slicing thickness

Thinner_
Set the desired slicing thickness by
1
moving the lever to the left for thinner
slices or to the right for thicker slices.
Installing the r_ever_sible shr_edding disc
Hold the or reversible shredding disc
1
by the 2 finger grips with the desired
shredding side facing UP . Insert the disc
adapter into the hole in the bottom of
the disc.
TIP: You may need to turn the disc/adapter until it drops down into place.
Install the work bowl cover, being sure
3
it locks into place.
10
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
will have no effect on operation.
Thicker_
Finger_ gr_ip
2
With the work bowl installed, slide the
drive adapter onto the power shaft.
Dr_ive
adapter_