Rain Bird TBOS-II Manual De Instrucciones página 17

- If you select "Custom cycle" (all days set to OFF by default)
. Select the desired program A, B or C in the flashing
box in the top left-hand corner of the screen using
the ABC key.
. Using the ON/OFF keys, select the watering days
in the calendar per program and confirm by pressing OK.
- If you choose "Cyclical"
. Select the watering cycle (1 to 6 days for the TBOS™ / 1
to 31 days for the TBOS-II™ controller only) using the
ON/OFF keys, and confirm by pressing OK.
. Then, enter your watering cycle start date "dd/m/year"
using the ON/OFF keys.
Start times:
- Select "Start times" and confirm by pressing OK.
- Select your program A, B or C in the box in the top left-hand
corner of the screen using the ABC key.
- Set the hours and minutes for each start time (up to 8 start times
per program) using the ON/OFF keys, and confirm by pressing OK.
When you exit this screen, the watering starts will automatically be
sorted in chronological order.
Watering run Time:
Each station can be assigned to the 3 programs A, B and C, with
different times for each program (TBOS-II™ controllers only).
- Then select "Programs" from the Infrared welcome menu and
confirm by pressing OK.
- Select "Valve run time" and confirm by pressing OK.
- Select the program A/B or C to be assigned to each valve (1 to 6)
using the ON/OFF keys, then go to hours and minutes by pressing
arrows. Confirm by pressing OK.
ENG
17