Transmitting An Irrigation Program To Tbos/Tbos-Ii Control Module; E - Manual Actions; Cancel Irrigation - Rain Bird TBOS-II Manual De Instrucciones

ENG
5. Transmitting an irrigation program to TBOS
Once programs A, B and C have been set, they can be sent via infrared to
the connected TBOS/TBOS-II™ Control Module.
- Select "Transmit" from the Welcome menu and confirm by pressing OK.
- The program to be downloaded will be displayed on the screen.
Confirm the transmission by pressing OK (If the program is uncompleted,
an alert may be displayed).
E – MANUAL ACTIONS

Manual actions override other actions. Any running program will therefore be deactivated to take
account of the manual function.
CAUTION: Manual commands will not occur if a sensor is ACTIVE (flow or rain).

1. Cancel Irrigation

- Select "Manual watering" in the TBOS™ IR welcome screen and confirm
by pressing OK.
- Then, select the type of manual action to be performed:
. Stop watering
. Start a station
. Start a program A, B or C
. Perform a test on all stations.
- Select the "Stop watering" menu and confirm by pressing OK
to manually stop the watering operating in progress.
20
/TBOS-II Control Module
TM TM