Tbos-Ii Field Transmitter-Radio Relay Communication - Rain Bird TBOS-II Manual De Instrucciones

ENG
IQ Software
IQ V2 Software allows remote central control of:
- Traditionally wired controllers: ESP-LXME Series Controllers
- Decoder controllers: ESP-LXD Series Controllers
- Battery operating controllers: TBOS or TBOS-II Control Modules equipped with TBOS-II Radio Adaptors
Radio finding commands of Radio Relays or TBOS-II Radio Adaptor can be made from Field Transmitter of from IQ.
IQ built its relay network to reach the maximum number of controllers.
3. TBOS-II Field Transmitter-Radio Relay Communication
TM
TBOS-II Field Transmitter to communicate with radio relay
Per default, all screens related to Radio Relays are hidden in the Field Transmitter.
To access to this menu:
- Press OK key , select "TBOS Radio" with OFF key and confirm by pressing OK.
- In the TBOS Menu, select ''Radio Settings" and press OK.
- Select Radio Relay, press OK and then tick "Enable".
Relay radio marking
Radio marking consists in receiving the identification number (ID) of each radio device in TBOS-II
To communicate, radio devices (TBOS-II
Radio marking is performed only once in the lifetime of the product (the first time it is used after leaving the
factory) or if the user moves a Radio Adaptor unit from one site to another (E.g. site 1 with network number 0001,
site 2: 0002, etc.).
34
Field Transmitter, Radio Relays or Radio Adaptator) have to use this ID.
TM
Field transmitter.
TM