Assembly; Packing List - Ryobi P5452 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

UNPACKING
This product requires assembly.
 Carefully remove the product and any acces-
sories from the box. Make sure that all items
listed in the Packing List are included.
WARNING:
Do not use this product if any parts on the Pack-
ing List are already assembled to your product
when you unpack it. Parts on this list are not
assembled to the product by the manufacturer
and require customer installation. Use of a prod-
uct that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
 Do not discard the packing material until you
have carefully inspected and satisfactorily oper-
ated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

PACKING LIST

Chain Saw with Scabbard
SAFE-T-TIP™
Scrench
Operator's Manual
WARNING:
If any parts are damaged or missing do not
operate this product until the parts are replaced.
Use of this product with damaged or missing
parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condi-
tion leading to possible serious personal injury.

ASSEMBLY

WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the bat-
tery pack from the product when assembling
parts.
MOUNTING THE SAFE-T-TIP™ NOSE
GUARD
See Figures 5 - 6.
 Remove the battery prior to assembling the pruner.
 Mount the SAFE-T-TIP™ on the bar nose.
 Fit the locking tab in the recessed slot in the guide
bar.
 Tighten the mounting screw with wrench until
snug.
 From the snug position, tighten the mounting
screw an additional 3/4 of a turn using a wrench.
 Check the security of the SAFE-T-TIP™ nose
guard and its mounting screw before each use of
the chain saw.
MOUNTING
TIGHTEN 3/4
OF A TURN
13 - English
SCREW
SAFE-T-TIP™
Fig. 5
Fig. 6

Publicidad

Tabla de contenido
loading

Tabla de contenido