Thermador PALPKITHW Manual De Instrucciones página 8

Pro Grand gas models
Ù
Disassemble the rangetop (page 9).
Step 1
Ù
Convert the regulator to LP gas (page 9).
Step 2
Ù Change the STAR® burner orifices according
Step 3
to your model and the corresponding table
(page 10).
Ù
Remove the backguard (page 14).
Step 4
Ù Change the main oven broil burner orifice to
Step 5
the 1.25 mm (125) orifice (page 14).
Ù 48'' models – change the aux oven broil
Step 6
burner orifice to the 0.813 mm (813) or #67
orifice (page 14).
Ù
Remove the oven door (page 16).
Step 7
Ù Remove the kick and front panels (page 17).
Step 8
Ù Change the main oven bake burner orifice to
Step 9
the 1.46 mm (146) orifice (page 17).
Ù
Step 10 48'' models – change the aux oven bake
burner orifice to the 1.13 mm (113) orifice
(page 18).
Ù Step 11 Reinstall the door(s) (page 16).
Ù
Step 12 Check the rangetop and oven for gas leaks
(page 19).
Ù
Step 13 Reassemble the rangetop and check STAR
burner flame performance (page 20).
Ù
Step 14 Set the valve screws for the STAR burners
(page 21).
Ù
Step 15 Check the broil and bake burner flame
performance (page 22).
Ù
Step 16 Reinstall the kick and front panels (page 17).
Ù Step 17 Place the conversion label (page 22).
Page. 8
Pro Grand dual fuel models
Ù
Disassemble the rangetop (page 9).
Step 1
Ù
Convert the regulator to LP gas (page 9).
Step 2
Ù Change the burner orifices according to your
Step 3
model and the corresponding table
(page 10).
Ù
Check the rangetop for gas leaks (page 19).
Step 4
Ù Reassemble the rangetop and check STAR
Step 5
burner flame performance (page 20).
Ù Set the valve screws for the STAR burners
Step 6
(page 21).
Ù Place the conversion label (page 22).
Step 7