Cisco Linksys WRT54GL Guía De Instalación Rápida página 7

N.
To test the Router's settings, open the web browser
from any computer. In the browser's Address field, enter
www.linksysbycisco.com/registration and press the Enter key.
Congratulations! The installation of the Wireless-G Broadband Router
IMPORTANT: After you have configured the Router, wireless
security should be configured to help protect your wireless
network.
3 Configure Wireless Security
The Router offers the following wireless security methods: WPA2 Personal,
WPA Personal, WEP, WPA2 Enterprise, WPA Enterprise, and RADIUS. Wireless
security is disabled by default, and it is strongly recommended that you
configure wireless security to help protect your wireless network.
A.
Open the Router's browser-based utility. Click the Wireless tab. Then
click the Wireless Security tab.
B.
From the Security Mode drop-down menu, select the wireless security
method you want to use. Instructions for WPA2 Personal, WPA Personal,
and WEP are provided here. For WPA2 Enterprise, WPA Enterprise, and
RADIUS, refer to the User Guide on the CD-ROM.
WPA2 Personal
WPA Algorithm
algorithm type, AES or TKIP + AES.
If you are not sure, keep the default,
TKIP + AES.
WPA Shared Key
63 characters.
Group Key Renewal
interval, which instructs the Router
how often it should change the
encryption keys. If you are not sure,
keep the default, 3600 seconds.
is complete.
Select the
Enter a key of 8 to
Enter a time