Operation-Tuner - Rockford Fosgate RAV Serie Instalación Y Operación

O – T
PERATION UNER
SELECTING A BAND
NOTE: There is no control on the remote to change the Band.
Press the BAND button repeatedly to cycle through FM1, FM2, and AM.
The act of selecting the band automatically enables that band.
TUNER OPTIONS
NOTE: There is no control on the remote to change between LOCAL and
DX tuner sensitivity.
DX is the default Tuner Option setting. The bracketed options are alternate
options.
• DX [LOCAL]
Selecting Tuner Options
Press and hold the BAND (LO/DX) button to change between LOCAL and DX tuner sensitivity.
SELECTING A STATION
Press the UP or DN {Down} button (
will rapidly proceed to the next (UP
Press and holding either the UP or DN {Down} button (
1 second will put you into TUNER MANUAL mode. You can now
manually search up or down at a rate of one digit per click (pressing
and holding the UP or DN {Down} button (
rapid searching).
PRESET BUTTONS
Each Tuner mode—FM1, FM2, and AM—has 10 presets for a total of 30 presets.
To Set a Preset Button
1. Tune the Tuner to the station you wish to program.
2. Press and hold any preset button (1 to 0) for five seconds and it will program that setting.
Works with remote as well.
AUTO STORE
If you want the Tuner to select the 10 most powerful stations in
order of their signal strength and assign them to Preset buttons
1 to 0, you can use Auto Store.
1. Press and the AS button and the Tuner will scan the entire
dial.
2. Auto Store will store radio stations independently in the
selected tuner bank (FM1/FM2/AM).
PROGRAMMING STATION TITLES
The name of a Station can be stored in memory using up to 10 characters as a title.
See PROGRAMMING TITLES at the end of the OPERATION-CD PLAYER section.
16
or ) once and the Tuner
) or pervious (DN
or
or ) will allow
) station.
) for
Remote
Cover Open
Remote
Cover Closed