Ferm TSM1035 Manual Original página 7

TABLE SAW
TSM1035
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2 - 6.
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Technical specifications
2. Safety instructions
3. Assembly instructions
4. Operation
5. Maintenance
1. TECHNICAL SPECIFICATIONS
Voltage
Frequency
Power input
No load speed
Saw blade dimensions
Number of teeth
Max. workpiece height 90º
Max. workpiece height 45º
Thickness of the riving knife
Blade body thickness
Measurements of bench (max)
Weight
Lpa (sound pressure level)
Lwa (sound power level)
Product information
Fig. A
1. Saw table with two rulers
2A. Parallel guide
2B. Guide extension
2C. Wing nuts
3. Extensions (2 pcs)
4. Dust extraction
5. Guard
6. Mitre guide
7. Push stick
8. On/off switch
9. 2 in 1 adjustment handle
10. Locking knob
11. Electric plug
12. Ruler sawblade angel
13. Extension support (4 pcs)
14. Wrenches (2 pcs)
15. Legs (4 pcs)
16. Long bolts with nuts (8 pcs)
17. Small bolts with nuts for extensions (8 pcs)
18. Dust extraction connection
19. Sawblade guard knob
20. Riving knife
21. Saw table inlay
22A. Cross strut long (2 pcs)
22B. Cross strut short (2 pcs)
23. Rubber feet (4 pcs)
24. Additional legs (2 pcs)
25. Small bolts with nuts for cross strut (16 pcs)
26. Small bolts with nuts for additional legs (4 pcs)
27. Connection vacuum cleaner
28. Fixing screw
29. Carriage-type bolts with nuts
30. Holder clips
Check first whether or not the delivery has been
220-240 V~
damaged by transport and/or whether all the
50 Hz
parts are present.
1500W
5000/min
2. SAFETY INSTRUCTIONS
210 x 30 x 2.8 mm
T24
Explanation of symbols
70 mm
45 mm
2.0 mm
1.8 mm
676 x 500 mm
14.5 kg
99.6 dB(A) K=3dB
112.6 dB(A) K=3dB
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates the presence of an electrical
voltage.
7