General Outline; Machine Identification; Main Parts - Makita HW120 Manual De Instrucciones

2.

General outline

The machine is exclusively meant for washing and cleaning with
hot or cold water surfaces apt to being treated with mechanical
high pressure jet system and subject to eventual chemical action
of detergents. Before using the machine, make sure that the
identification plate is fixed on the machine; if the plate is missing,
please don't use the machine and contact immediately your dealer.
Don't leave the machine unattended in your work environment.
After the daily use, it is recommended to keep the machine in a dry
place protected from bad weather conditions.
3.

Machine identification

4
4.

Main parts

1.
Lance
2. High pressure hose
3.
Feeding cable
4. Detergent suction
5.
Detergent filter
6.
Fuel tank
7. By-pass valve
8.
High pressure pump
9. Electrical motor
10.
Fuel pump
11. Burner motor
12.
Boiler
13.
Combustion head
14. Pressure switch
15.
Electrical panel
16. ON/OFF switch
17.
Thermostat
18.
Pressure gauge
EN