Using The Send (Snd) Function; Setting The Send Function - Nova Max Link Guia Del Propietario

Your Nova Max Link Blood Glucose Monitor has a send function.
The Send Function allows you to turn on or off sending blood
glucose results to your Paradigm Model 512, 712, or higher insu-
lin pump.
NOTE: The "Snd" function is turned on when you receive your monitor.

Setting the Send Function

The monitor is off, with no test strip inserted in the test strip slot.
1. Begin Setup: Press and continue to hold the Mode
button. You will hear 2 short beeps and see "Snd" and the
word "On. " Release the Mode button.
NOTE: If you release the Mode button too soon, turn off your
monitor by pressing and holding the Mode button. Repeat Step 1.
2. Set glucose test result transfer to insulin pump. The glucose
test result transfer to insulin pump is preset to "On. " Press the
left/right arrow
"On" or Off. "
3. Press the Mode
and to advance to set insulin recording function.

Using the Send (Snd) Function

button briefly to confirm your choice
buttons to select the setting
13