Review Test Results In Memory - Nova Max Link Guia Del Propietario

NOTE: If a test strip is inserted while in the Data Review mode, the
monitor immediately switches to test mode.
To review test results that are stored in memory, start with the monitor
in the off position. The monitor is in the off position when the screen is
completely blank. To turn off the monitor, hold the Mode
down until the screen goes blank then release the button.
1. With the monitor off, press the Mode
button. The most recent test result should
display. If there are NO results in memory,
the screen displays 3 dashes.
2. Press the Left/Right
view all the data in memory. The Left arrow
goes back in time and the Right arrow goes
forward in time. All results including control
results, marked results, and unmarked results
can be viewed.
3. At the end of reviewing individual test re-
sults, the screen displays "End Mem. "
NOTE: For data averaging, HI results equal
600 mg/dL and LO results equal 20 mg/dL.

Review Test Results in Memory

button to
button
31