Technical Specifications - Velleman SMV24 Manual Del Usuario

USB port
• The USB port [4] delivers a fixed 5VDC/1A output. Simply connect a
suitable device to the port or use the included USB cable to connect a
device with a mini-USB input port.
• After use, first switch off the connected device before disconnecting the
USB cable. Always unplug the adaptor from the mains when not in use.
DC output
• Connect the desired plug [5] to the DC output jack [3]. The plug fits
only one way, do not force! The adaptor automatically selects the
matching output voltage. This voltage is shown on the LCD.
• Make sure the device that will be powered by the adaptor is switched
off. Note: this connected device must comply with the selected
voltage, current and polarity!
• Insert the other end of the plug into the device and switch it on.
• After use, first switch off the connected device before disconnecting the
adaptor plug. Always unplug the adaptor from the mains when not in
use.
7. Maintenance
• Disconnect the adapter from the mains and wipe it with a moist, lint-
free cloth. Do not use alcohol or solvents.
• Do not submerge the adaptor in water or any other liquid.
• There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts.
8.

Technical specifications

supply voltage
power
efficiency
power consumption @ 0 load
dimensions
length USB cable
plugs, voltages and dimensions
spare plugs
additional plugs
weight
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulted from
(incorrect) use of this device. For more info concerning this product
and the latest version of this user manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
16.06.2010
PSSMV24
100 ~ 240VAC 47~63Hz
70W
>= 83%
<1.5W
110 x 48 x 21mm
1m
see table page 2
PLUGSPSET7
PLUGSPSET6
23g
5
©Velleman nv