Organisational Measures; Informal Safety Measures; Technician Training; Transport And Assembly - Hammerbacher XMST Serie Manual De Instrucciones

3.1 Organisational measures

It is best to assemble the table frame with two persons. The turning of the frame with the assembled
tabletop, in particular, must be carried out by two persons.

3.2 Informal safety measures

• Keep the assembly and operating instructions at the place of use of the table frames at all
times.
• Keep all safety and risk notes at the table in a legible condition and renew them if necessary

3.3 Technician training

• Only persons over the age of 16 may install the table frame and work at it.
• The technicians must have read and understood the assembly and operating instructions.

3.4 Transport and assembly

• Only move the table frame with two persons and at the lowest table height.

3.5 Risks from electrical power

RISK
• Only connect the table frame to the power supply once assembly is complete.
damaged cable replaced immediately with an undamaged cable by a specialist dealer.
• Disconnect the table frame from the power supply during longer periods of standstill or non-
use.
44 XMST
Risk to life if a cable is broken or damaged.
There is risk to life and limb or to property, caused by electrical power,
if a cable is broken or damaged.
with the included mains cable.
Do not bend the cable. Do not place any heavy objects on the cable.
Do not pull on the cable. Pull the mains plug in order to disconnect the
table base from the mains power.
Disconnect the controls from the power network immediately if there
are signs of cable breakage. Contact your specialist dealer.
If the mains power line on this device is damaged then it must be
replaced by the manufacturer or the manufacturer's customer service