Hammerbacher XMST Serie Manual De Instrucciones página 49

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Please observe the safety notes!
Reset obligations prior to initial operation:
- The table must be in the correct position before initial operation.
- The power must be connected before initial operation.
- A reference drive (Reset) must be carried out on the table before initial operation.
For this proceed as follows:
Press the 'down' button on the controls and hold it down. After
10 seconds the table will move to the lowest position and a small 'click' can be heard.
If the button is released before the process is complete then the RESET process is interrupted and must
be started again.
drive.
Please retain these instructions!
XMST
49

Publicidad

Tabla de contenido
loading

Productos relacionados para Hammerbacher XMST Serie

Este manual también es adecuado para:

Xmst12Xmst16Xmst19Xmst2eXmst22

Tabla de contenido