Additional Information; Customer Service; Observe The Safety Notes For Dismantling; Waste Disposal - Hammerbacher XMST Serie Manual De Instrucciones

9. Additional information

9.1 Customer service

9.2 Observe the safety notes for dismantling:

Contact with electrical voltage can lead to serious injuries and to death by electric shock.
Do not try to open the casing on the components: control, electric motor, columns or operating panel
9.2.1 Cease operation of the table frame:
• Remove the mains plug from the socket.
9.2.2 Remove the table frame and dismantle if necessary
• In order to remove and dismantle the table frame you may need to contact
he customer service department of your specialist dealer

9.2.3 Waste disposal

• Dismantle the table frame according to materials and dispose these in an environmentally
friendly manner. Please observe national regulations.
Note:
In PowerFailDetection power failures are determined and all relevant
data is stored before the voltage falls below a critical level. E81 is
displayed the next time the control is switched on and the control is
clicked three times then this storage was not possible (as in only a
few exceptional cases). In order to resolve this error a manual reset is
necessary
Contact data see page 40
XMST 55