Replacing The System Outer Foil And The Inner Blades; Troubleshooting - Panasonic ES‑ST25 Instrucciones De Operación

Replacing the system outer foil and the inner blades

system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons [A3] and
lift the outer foil section [A] upwards.
►Attaching the outer foil section
After turning the water inlet surface to the front,
securely attach the outer foil section [A] to the
shaver until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release
buttons [A] and pull down the system
outer foil.
2. Align the water inlet surface and the
system outer foil mark ( ) and securely
attach together.
• The system outer foil cannot be
reversely attached.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
16
►Replacing the inner blades
1. Remove the inner blades [A:] one at a
time.
• Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
2. Insert the inner blades [A:] one at a time
until they click.

Troubleshooting

Trimmed hairs fly all
over.
2
1 1
System outer foil gets hot.
Problem
This can be improved by
cleaning every time after shaving.
Clean the inner blades with the
brush.
Apply oil after cleaning with
water and leaving to dry
thoroughly.
Confirm that the cleaning
shutter is firmly closed.
Apply oil.
(See page 15.)
Replace the system outer foil if
it is damaged or deformed.
(See this page.)
1 2
Action