About This Guide - Chauvet DJ COLORband PiX Mini Guía De Referencia Rápida

COLORband PiX™ Mini QRG
About This
Guide
Disclaimer
Safety Notes
Contact
What Is
Included
The COLORband PiX™ Mini Quick Reference Guide (QRG) has basic
product information such as mounting, menu options, and DMX values.
Download the User Manual from
details.
The information and specifications contained in this QRG are subject to
change without notice.
These Safety Notes include important information about installation, use,
and maintenance.
· This product is not intended for permanent installation.
· ONLY connect this product to a grounded and protected circuit.
· Always disconnect from power before cleaning or replacing the fuse.
· DO NOT look at the light source when the product is on.
· Make sure the power cord is not crimped or damaged.
· Never disconnect this product from power cord by pulling or tugging on the
cord.
· When mounting this product overhead, use a safety cable.
· DO NOT allow flammable materials close to the unit while operating.
· DO NOT touch this product when it is operating because it may be hot.
· The voltage of the outlet to which you are connecting this product must be
within the range stated on the decal or rear panel of the product.
· Always mount this product in a location with adequate ventilation, at least 20
in (50 cm) from adjacent surfaces.
· The product is for indoor use only (IP20)! To prevent risk of fire or shock,
do not expose the product to rain or moisture.
· Be sure that no ventilation slots on the unit's housing are blocked.
· Never connect this product to a dimmer or rheostat.
· Replace the fuse with the same type and rating.
· ONLY use the hanging/mounting bracket or the handles to carry this
product.
· The maximum ambient temperature is 104 °F (40 °C). Do not operate this
product at higher temperatures.
· In the event of a serious operating problem, stop using immediately.
· DO NOT open this product. It contains no user-serviceable parts.
· To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
· From outside the U.S., UK, Ireland, or Mexico, contact the distributor of
record to request support or return a product.
· From inside the U.S., UK, Ireland, or Mexico, use the information in
Contact Us at the end of this QRG.
· COLORband PiX™ Mini
· 2 L-Brackets
www.chauvetlighting.com
· Power Cord
· Warranty Card
· Quick Reference Guide
2
EN
for more