Thrustmaster Run 'N' Drive Manual Del Usaurio página 6

PC
INSTALLATION ON PC
The CD-ROM included with this product lets you install the Force Feedback drivers.
1. Set the USB selector on the receiver (11) to the "PC" position.
2. Insert the installation CD-ROM and follow the instructions. Once the installation is complete, click
Finish and restart your computer.
3. Once your computer has restarted, connect the receiver's USB connector to one of your computer's
USB ports. Windows® XP or Vista will automatically detect the new device.
4. Switch on your gamepad using the POWER ON/OFF switch (15).
5. Click Start/Settings/Control Panel and then double-click Game Controllers.
The Game Controllers dialog box displays the gamepad's name with OK status.
6. In the Control Panel, click Properties to configure your gamepad:
• Test device: allows you to test and view the buttons, D-pad, mini-sticks, triggers and optical wheel.
• Test forces: allows you to test and configure vibration effect settings.
You are now ready to play!
IMPORTANT NOTES FOR PC
- The USB selector on your receiver (11) must always be set to "PC" before connecting the receiver.
SELECTING "AXES" ON PC
•
Selecting axes via "Software":
On page 1 of the Control Panel, click the number of axes you wish to use and then click OK.
•
Selecting axes via "Hardware":
Press the HOME button (6) to select the number of active axes.
5/14