Product Description And Specifications - Bosch GUS 10,8 V-LI Professional Manual Original

Ocultar thumbs Ver también para GUS 10,8 V-LI Professional:
Tabla de contenido

Publicidad

OBJ_BUCH-1417-001.book Page 11 Tuesday, May 17, 2011 11:37 AM
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
Battery tool use and care
Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. Liquid ejected from the battery
may cause irritation or burns.
Service
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will en-
sure that the safety of the power tool is maintained.
Safety Warnings for Cordless Universal Cutters
Do not work materials containing asbestos. Asbestos is
considered carcinogenic.
While cutting, pay attention for "live" wires. Danger of
injury.
While cutting, never guide your hand in front of the
blade. Danger of injury.
Prevent unintentional switching on. Carrying power
tools with your finger on the On/Off switch can lead to ac-
cidents.
Do not open the battery. Danger of short-circuiting.
Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and mois-
ture. Danger of explosion.
Bosch Power Tools
In case of damage and improper use of the battery, va-
pours may be emitted. Provide for fresh air and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
Use only original Bosch batteries with the voltage list-
ed on the nameplate of your power tool. When using oth-
er batteries, e. g. imitations, reconditioned batteries or
other brands, there is danger of injury as well as property
damage through exploding batteries.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting flexible, soft materials of
up to 11 mm in thickness, such as carpet, PVC, cardboard,
leather, fabrics and similar materials.
It is suitable for straight and curved cuts.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Knurled screw
2 "Cut Control" cutting-line mark
3 Adjustable blade guard (2–11 mm)
4 On/Off switch
5 Handle (insulated gripping surface)
6 Battery
7 Battery unlocking button
8 Button for charge-control indicator
9 Battery charge-control indicator
10 Blade
11 Blade screw
12 Guide edge
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K =3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
English | 11
1 609 929 Y38 | (17.5.11)

Publicidad

Tabla de contenido
loading

Tabla de contenido