Dynex DX-EBUSB Guia Del Usuario página 17

Setting up your wireless network adapter
4 Click Save to finish. Encryption in the wireless router is now set. Each of your
computers on your wireless network will now need to be configured with the same
security settings.
Caution: If you are using a wireless client (such as your computer equipped with a wireless
Setting up 128-bit WEP encryption:
1 Select OPEN from the Network Authentication menu on the Wireless Network
Properties tab on the Edit information for a network page.
2 Select WEP from the Data Encryption menu.
3 After selecting your WEP encryption mode, enter your key by typing in the hex key
manually or type in a passphrase in the Passphrase field, then click Generate to
create a key.
A hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9.
For 128-bit WEP, you need to enter 26 hex characters.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
4 Click Save to finish. Encryption in the wireless router (or access point) is now set. Each
of your computers on your wireless network will now need to be configured with the
same security settings.
USB adapter) to turn on the security settings in your wireless router, you will temporarily
lose your wireless connection until you activate security on your wireless client. Please
record the key prior to applying changes in the wireless router. If you don't remember the
hex key, your client will be locked out of the wireless router.
17