Basic Settings; Calling Up The "Basic Settings" Menu; Selecting Functions From The Basic Settings Menu; Symbol Function - Hilti SI­-AT­-A22 Manual De Instrucciones

Unlocking the module
The adaptive torque module has to be unlocked before changes can be made to the settings.
▶ To unlock the adaptive torque module, press the
▶ In the display a selection frame appears around the last previously shown type of fastener and the
last previously shown operating mode.
▶ The torque module is unlocked and in setting mode. The impact wrench is deactivated.
Navigation
When the selection frame and two or more elements (options, parameters) are visible in the display, you can
move the selection frame by pressing the arrow buttons
Selecting options / changing parameters
When the torque module is unlocked, you can change options or parameters as described below.
▶ Position the selection frame in the display on the element (option / parameter) you want to change.
▶ Press the OK button.
▶ A black background appears behind the element.
▶ Use the arrow buttons to select the setting you want.
▶ Press the OK button to accept the setting.
▶ The element reappears surrounded by the selection frame.
Locking the module
When you have made all your changes you have to relock the adaptive torque module.
▶ Press the lock button
▶ The selection frame disappears. Your operating parameters settings have now been saved and
cannot be changed accidentally.
▶ The adaptive torque module is locked and the impact wrench is reactivated.
5.5

Basic settings

5.5.1

Calling up the "Basic settings" menu

1. If it is locked, unlock the torque module by pressing the lock button and holding it down for at least
1 second.
2. Press the OK button and hold it down for at least 1 second.
▶ The "Basic settings" menu appears on the display.
5.5.2

Selecting functions from the basic settings menu

1. Use the arrow buttons to move the selection frame to the symbol for the desired function.
Functions in the "Basic settings" menu
Symbol Function
Show the date and time set in the torque module's clock
The AT Documentation Software has to be used to set the clock.
Show the remaining time / period of use until servicing of the impact wrench is due
Show the percentage of memory used in the torque module
When the reading reaches 100%, the oldest data will be overwritten.
You can use the AT Documentation Software to export the logged data and clear the torque
module's memory.
Hilti recommends exporting the data and saving the exported data at regular intervals.
Show the version of the software installed on the torque module
Exit the "Basic settings" menu
2. Press the OK button.
5.5.3

Display showing maintenance status / remaining period of use

After activation of the
wrench until the next service is shown in the following display screens.
6 English
.
symbol in the basic settings menu the remaining period of use of the impact
lock button and hold it down for at least 1 second.
and .
2124681
*2124681*