Product-Dependent Symbols; Symbols On The Product; Product Information; Safety Precautions - Hilti SI­-AT­-A22 Manual De Instrucciones

1.3

Product-dependent symbols

1.3.1

Symbols on the product

The following symbols are used on the product:
Direct current (DC)
1.4

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Type
Generation
Serial no.
2 Safety
2.1

Safety precautions

▶ Observe the safety precautions in the operating instructions for the wrench.
2 English
SI­AT­A22
01
2124681
*2124681*