Care And Maintenance; Transport And Storage - Hilti SI­-AT­-A22 Manual De Instrucciones

3. Pull the torque module to the rear and off the impact wrench.
5.12 Connecting the torque module to a PC
1. Remove the torque module.
2. Open the sliding cover on the underside of the torque module.
▶ The USB port is accessible.
3. Plug the connector of the USB cable (type B, USB 2.0) into the USB port of the torque module.
4. Plug the other connector of the USB cable (type A) into the PC.
▶ The torque module is now powered off the PC. The USB logo
After unplugging the USB cable from the torque module, close the cover over the USB port to
protect it from dirt and dust.
6

Care and maintenance

To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.com
▶ Keep the product, especially its grip surfaces, clean and free from oil and grease. Do not use cleaning
agents containing silicone.
▶ Clean the outer surfaces of the tool with a slightly damp cloth at regular intervals.
7

Transport and storage

▶ Prevent damage by transporting and storing the adaptive torque module in the storage box supplied for
the purpose, or in the toolbox of the impact wrench.
8 Troubleshooting
If the problem you are experiencing is not listed in this table or you are unable to remedy the problem by
yourself, please contact Hilti Service.
Please also pay attention to the troubleshooting information provided in the operating instructions for
the impact wrench used..
Malfunction
The symbols indicating "Lock
module" are displayed.
The symbols indicating "Bat-
tery temperature too high" are
displayed.
The symbols indicating "Bat-
tery temperature too low" are
displayed.
12 English
7
Possible cause
Torque module unlocked.
The battery has overheated.
Battery temperature is too low.
appears on the module's display.
Action to be taken
▶ Press the lock button to lock
the torque module and activate
the impact wrench.
▶ Change the battery or allow the
battery to cool down.
▶ Fit a battery that's at a tem-
perature within the permissible
battery operating tempera-
ture range (please refer to the
operating instructions for the
battery).
2124681
*2124681*