Using The Dust-Away® Hard Floor Attachment; Storage - Shark Rocket HV320 Guia Del Propietario

USING THE DUST-AWAY®
HARD FLOOR ATTACHMENT
IMPORTANT: DO NOT use the
Dust-Away Hard Floor Attachment
without the microfiber pad�
MICROFIBER PAD CARE
Machine-wash or hand-wash the pad
separately in warm water with
liquid detergent�
DO NOT use bleach or fabric softeners
as they may damage the pad or
leave a coating that will reduce its
cleaning performance�
Tumble dry low or line-dry to extend
the life of the microfiber fabric�
For the best results, replace the
microfiber pad every 3 to 4 months�
13
s h a r kc l e a n . c o m
STEP 1
Slip two tabs between the nozzle and
the duster base and attach them to the
front fasteners�
STEP 2
Pull the other two tabs tightly around
to the back fasteners� Ensure the pad
is flat against the bottom surface and
tightly secured�
Slide the power switch to setting I, Bare
Floor, Small Area Rugs to clean hard
floors� Do not use to clean damp floors
or wet/sticky messes� Use only pads
provided by Shark®�

STORAGE

Press the Wand Release button on the top of the wand to release the handheld
vacuum� Align the catch on the bottom of the handheld vacuum with the storage
hook on the wand� Slide the handheld vacuum down so that the catch hangs from
the storage hook� Wrap the cord counterclockwise around the cord hooks, starting
with the top hook�
Note: Ensure there is slack where the cord connects to the handheld vacuum�
Handheld
Vacuum Catch
Handheld Vacuum
Storage Hook
14
s h a r kc l e a n . c o m