Assembling Your Vacuum; What Does The Brushroll Indicator Light Mean; Using The Motorized Floor Nozzle - Shark SharkFLEX HV392 Serie Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLING YOUR VACUUM

WARNING: This
vacuum does not stand
up on its own. Using
the unit when it lacks
stability may result
in personal injury. To
place in MultiFLEX
Storage mode, press the
MultiFLEX Lock Release
Button and gently fold
the handheld vacuum
forward toward the floor
nozzle�
NOTE: Before vacuuming
your delicate area rugs
or carpet, refer to the
manufacturer's recommended
cleaning instructions.
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushrolls are on and
working as they should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
No Light
The brushrolls are not
spinning.
1
Insert the wand into the
motorized floor nozzle
connector, pressing it in
DID YOU KNOW?
until it clicks securely into
place.
The motorized floor nozzle has
LED headlights that illuminate
the floor surface being
cleaned. The lights turn on
automatically in either speed
setting.
7
1-800-798-7398
STEP 1
STEP 2
CLICK
CLICK
2 Insert the handheld
vacuum into the top of the
wand, pressing it in until it
clicks securely into place.

USING THE MOTORIZED FLOOR NOZZLE

1
Slide the Power/Selector Switch to one of
the 3 settings:
Setting O: Turns off power.
Setting I: For cleaning bare floors and
area rugs.
Setting II: For cleaning high pile carpets.
To start cleaning, recline wand to activate
brushrolls.
USING THE MULTIFLEX™ WAND
To easily access hard-to-reach areas under
furniture, press the MultiFLEX Lock Release
Button to position the wand to a lower
angle.
8
s h a r kc l e a n . c o m

Publicidad

Tabla de contenido
loading

Tabla de contenido