Passport P-10W UHF Manual Del Usuario página 5

Overview of Features
A. Molded Carry Handle.
B. 5" Full-Range Loudspeaker.
C. Channel Indicator.
D. HOT SPOT.
E. Program Mic Button.
F. Channel Scan Button.
G. 1/4" (6.3mm) Input Jack. This is a mic level input jack. Use this jack to plug
in a wired microphone if necessary (second mic input).
H. Power Switch/Wireless Mic Volume Control. A click-off position is located
at the fully counter-clockwise position. Rotating the control clockwise
increases the output volume of the wireless microphone.
I. Power Indicator Light. Lights up when power is on. Color is red when the
receiver is not receiving a signal from the wireless mic. The color is green
when a good signal is being received.
J. 1/4" Input Level Control. Adjusts the level of the microphone plugged into
the 1/4" jack (G).
K. Battery Charge Indicator. Red light indicates battery is low and needs
charging. Green, blinking light indicates charging in progress. Solid green
light indicates battery is fully charged.
L. Line Out Jack. Allows you to send the audio signal from the P-10W UHF
to an external amplifier, mixer or recording device.
M. 1/8" (3.5mm) Auxiliary Input. For connecting CD, Cassette, or audio line
output from another device like a computer sound card.
N. DC Power Input Jack. Plug in the battery charger here (Positive tip).
O. Shoulder Strap.
P. Battery Compartment. Shoulder strap, cord, and Charger can be stored in
here.
Q. Mic Stand Adapter.