Setup Menu; Reset; Gage Info; Sound - DeFelsko PosiTector RTR-3D Manual De Instrucciones

Reset

Reset (menu reset) restores factory settings and returns the Gage to
a known condition. The following occurs:
- All batches and stored datasets, batch names and screen
captures are erased.
- Menu settings are returned to the following:
Memory = OFF
Memory Display = ON
2D* = ON
*
PosiTector RTR-3D models only
Perform a more thorough Hard Reset as follows:
1. Power down the Gage and wait 5 seconds.
Simultaneously press and hold the (+) and
2.
buttons until the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition.
It performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Alarm settings are set to defaults.
- Menu settings are returned to the following:
Units = microns
Flip Display = Normal
Sound = ON
Language = English
NOTE:
Date, Time and WiFi are not affected by either Reset.

Gage Info

Displays gage body/probe details including serial numbers,
PosiSoft.net registration key, remaining memory capacity for storage
of readings, date and time and software packages.
For security purposes, the serial number and registration key are
required to add the Gage to your PosiSoft.net account.

Setup Menu

Bluetooth = OFF
WiFi = OFF
3D* = ON
Battery Type = Alkaline
Backlight = Normal
USB Drive = ON
Auto Sync = ON
13
Tape Grade = XC
Linearize = ON
appears.
center