Standard Models; Advanced Models - DeFelsko PosiTector RTR-3D Manual De Instrucciones

Standard models store up to 250 readings in one batch. The
Memory Menu includes the following options...
On: turns memory on and begins recording
Off: stops recording (stored readings remain in memory)
Clear: removes all readings from memory
View: lists group statistics and all stored readings on the display. It
will begin by showing statistics based on all readings in memory. Use
the Up and Down buttons to scroll through all readings. Press
to exit.
Advanced models store 100,000 readings in up to 1,000 batches.
2D/3D images are stored if checked within the Setup menu. The
Memory Menu includes the following options:
New Batch
Closes any currently opened batch and creates a new batch name
using the lowest available number. For example, if only Batch 1 and
Batch 3 exist, then Batch 2 would be created and made the current
batch. The
and stored into this new batch. New batches are date stamped when
they are created. Each reading is also data/time stamped.
SHORTCUT:
NOTE:
Remove the last reading from the current open batch by pressing (-).
If memory is ON, continuous measurements can be taken and stored
in memory.
Each batch can contain a maximum of 10,000 readings.
icon appears. Each measurement will be displayed
When a batch is open, press (+) to create a new batch
17