Requests For Service And Spare Parts; 2- Technical Features; Technical Features And Performance; Installation - Carlo De Giorgi 2900 Manual De Instrucciones

LABORATORY MICROMOTOR
1.5 – REQUESTS FOR SERVICE AND SPARE PARTS
For all electrical maintenance requirements, contact CARLO DE GIORGI
di Baranzate di Bollate, Via Tonale, 1, Milan, Italy.
In the case of faults, notify CARLO DE GIORGI technical personnel of the
exact nature of the problem, specifying also the lot number shown on the
label affixed to the rear of the appliance.

2- TECHNICAL FEATURES

2.1 – TECHNICAL FEATURES AND PERFORMANCE
Performance: intermittent duty
Voltage
Frequency
Installed power
V to motor
out
Max. tool speed
Delayed acting fuse
Mass
Transmitted vibration
(acceleration)

3 - INSTALLATION

3.1 - POSITIONING

The appliance is supplied assembled and ready for use after connecting
the control devices and the micromotor complete with handpiece to the
power supply. The package contains:
a) power supply unit, complete with mains cable;
b) micromotor complete with handpiece, equipped with 2.35 mm ∅ collet
(excluding Gold version);
c) footpedal (bench top versions only);
d) rubber mat;
e) user instructions.
The appliance can be moved by hand without requiring lifting devices.
Carlo de Giorgi
2900
V 230/120 230/120 230/120 230/120 230/120
Hz 50/60
W 70
V 59
rpm 25,000
A 1
kg 2.7
m/s² < 2.5
Class II appliance
3000 4000
light
50/60 50/60
120 100
24 30
30,000 30,000
1.25 1.25
3.2 3.3
< 2.5 < 2.5
5000 Green
Star
50/60 50/60
300 90
40 30
30,000 30,000
2 1.25
4.3 3.3
< 2.5 < 2.5
GB - 5