Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
Use only mild soap and a damp cloth to clean
the tool. Never let any liquid get inside the tool;
never immerse any part of the tool into a liquid.
LUbRICATION
Porter Cable tools are properly lubricated
at the factory and are ready for use. Tools
should be lubricated regularly every year
depending on usage. (Tools used on heavy
duty jobs and tools exposed to heat may
require more frequent lubrication.) This
lubrication should be attempted only by
trained power tool repairperson's such as
those at Porter Cable service centers or in
other qualified service personnel.
REPLACEmENT PARTS
Use only identical replacement parts. For a
parts list or to order parts, visit our service
website at www.portercableservicenet.com.
You can also order parts from your nearest
Porter Cable Factory Service Center or
Porter Cable Authorized Warranty Service
Center. Or, you can call our Customer Care
Center at (888) 848-5175.
ACCESSORIES
WARNING:
than those offered by Porter Cable, have
not been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury, only
Porter Cable recommended accessories
should be used with this product.
A complete line of accessories is available
PROBLEM
• Light will not illuminate
• Battery pack will not charge. • Battery pack not inserted into charger. • Insert battery pack into
• Unit shuts off abruptly. • Battery pack has reached its
For assistance with your product, visit our website at www.portercable.com for a list of
service centers, or call the PORTER-CABLE Customer Care Center at (888) 848-5175.
Since accessories, other
TROUBLEShOOTING
POSSIBLE CAUSE
• Battery pack not installed properly.
• Battery pack not charged.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
maximum thermal limit.
• Out of charge. ( To
maximize the life of the
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
from your Porter Cable Factory Service
Center or a Porter Cable Authorized
Warranty Service Center. Please visit our
Web Site www.portercable.com for a catalog
or for the name of your nearest supplier.
ThE RBRC™ SEAL
The RBRC™ (Rechargeable Battery
Recycling Corporation) Seal on
the lithium-ion battery (or battery
pack) indicates that the costs to
recycle the battery (or battery pack) at the end
of its useful life have already been paid by
PORTER-CABLE . In some areas, it is illegal to
place spent lithium-ion batteries in the trash or
municipal solid waste stream and the RBRC
program provides an environmentally conscious
alternative.
RBRC in cooperation with PORTER-CABLE
and other battery users, has established
programs in the United States and Canada
to facilitate the collection of spent lithium-ion
batteries. Help protect our environment and
conserve natural resources by returning the
tool to an authorized PORTER-CABLE service
center for recycling. You may also contact
your local recycling center for information on
where to drop off the spent battery, or call
1-800-8-BATTERY.
This Class B digital apparatus complies with
Canadian ICES-003. This device complies with
part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device
may not cause harmful interference, and (
2) this device must accept any interference
received, including interference that may cause
undesired operation.
17
POSSIBLE SOLUTION
• Check battery pack
installation.
• Check battery pack
charging requirements.
charger until LED illuminates.
• Plug charger into a
working outlet. Refer to
"Important Charging Notes"
for more details.
• Move charger and battery
pack to a surrounding air
temperature of above
40 degrees F (4,5°C) or
below 105 degrees F
(+40,5°C).
• Allow battery pack to cool
down.
• Place on charger and
allow to charge.
Publicidad
Tabla de contenido
