Unpacking; Important - LG WM1377HW Serie Guía Del Usuario E Instrucciones De Instalacion

Ocultar thumbs Ver también para WM1377HW Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

I N S TA L L AT I O N I N S T R U C T I O N S

UNPACkING

If you must lay the washer down to remove the
base packaging materials, always lay it carefully
on its side. Do NOT lay the washer on its front
or back.
IMPORTANT: To prevent internal damage
during transport, the washer is equipped with
4 shipping bolts and plastic retainers. These
bolts and retainers MUST be removed before
operating the washer.
• Failure to remove shipping bolts and retainers
may cause severe vibration and noise, which can
lead to permanent damage to the washer. The
cord is secured to the back of the washer with
a shipping bolt to help prevent operation with
shipping bolts in place.
1
Starting with the bottom 2 shipping bolts,
use the included wrench to remove the
4 shipping bolts by turning them
counterclockwise.
10
Cap
2
Remove the retainers by turning them slightly
while pulling. Rotate and press the hole caps
into the shipping bolt holes.
NOTE: Save the bolts and retainers for
future use. To prevent damage to internal
components, the shipping bolts and
retainers must be installed when
transporting the washer.
Carton Base

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wm1355h serie

Tabla de contenido