EN
1. WHIRLPOOL ON/OFF operation BLUE
light.
2. WHIRLPOOL button.
3. AIRPOOL operation GREEN light.
4. AIRPOOL ON/OFF button.
5. LIGHT operation YELLOW led.
6. LIGHT ON/OFF button.
7. System operation light.
8. WHIRLPOOL or AIRPOOL system ON/
OFF button.
- fill the bathtub up to the highest jets level
that allows the system functioning.
- The AIRPOOL and WHIRLPOOL
systems duration is pre-set for 15 minutes
and it can not be changed.
AIRPOOL, WHIRLPOOL AND LIGHT
WHIRLPOOL FUNCTION
To start the whirlpool function, push the
button (2) / (8). The "WHIRLPOOL system
functioning" blue LED will light up. To stop
whirlpool operation before the end of the
set time, just push the same button again.
Hydromassage intensity is fixed.
"Flashing LED" indicates lack of water; add
more water until it covers the jets.
AIRPOOL FUNCTION
To start the airpool function, push the
button (4) / (8). The "airpool system
functioning" green led will light up.to stop
the airpool function before the end of the
set time, push again the same button.
"flashing green led" indicates water
8