Roubleshooting - Glass 1989 POP Serie Manual De Uso

Problem
The hydro system does not
work
EN
The air system does not work
T h e s y s t e m s t a r t s u p
automatically without an
obvious reason
The cleaning and disinfecting
device does not work
Water jets
Water leaks under the tub
The underwater light does
not come on
The controls remain off
The controls are not working
properly

ROUBLESHOOTING

Possible cause
Is the water level sufficient?
Is there electricity?
Is the keypad activated?
Are the jet clean nozzles
open?
Is the air intake blocked?
If the problem persists, contact the authorised service centre
Is the water level sufficient?
Is there electricity?
Is the keypad activated?
If the problem persists, contact the authorised service centre
Contact the authorised service centre
Has the control been activated
correctly?
Is the water level above the
nozzles?
Is the container filled with
sufficient liquid disinfectant?
Contact the authorised service centre
Are the jets open?
Are the jets clogged?
Contact the authorised service centre
Contact the authorised service centre
Is the water level sufficient?
Has the control been activated
correctly?
Is there electricity?
Contact the authorised service centre
Is there a power failure?
Is the dedicated switch put
to 'on'?
If the problem persists, contact the electrician or the authorised service
centre
Contact the authorised service centre
14
Possible remedy
Wait for the tub to fill
Contact the electrician
Activate the keypad
If they are not, turn the diffuser counter-
clockwise
Clean the filter
Wait for the tub to fill
Contact the electrician
Activate the keypad
Activate the function
Fill the tub
Fill the container with liquid disinfectant.
Open the jets
Clean the jets
Fill the tub
Activate the function
Contact the electrician
Check the electricity supply in the home
by checking other household electrical
appliances that should be working
Put the switch to 'on'