Operating modes and configuration
3. Confirm the start time of 00:00 o'clock by shortly pressing the setting wheel (E).
4. Select the desired temperature for the starting time by turning/pressing and confirm.
5. Select and confirm the time indicated in the display by turning/pressing the set-
ting wheel.
6. Select the desired temperature for the set period by turning/pressing and confirm.
7. Repeat the process for the complete period from 00:00 to 23:59 o'clock.
Week profile 1-3: Heating, 4-6: Cooling
In case of a CO signal the program changes from heating or cooling
automatically according to the following scheme:
1 (heating) to 4 (cooling), 2 (heating) to 5 (cooling), 3 (heating) to 6
(cooling) resp. vice versa.
"OSSF" serves for activating ("On") or deactivating ("OFF") the Smart Start/Stop
function. Once this function is activated, the system calculates in a self-teaching
way when it must start the heating/cooling process in order to provide the stored
temperature exactly at the defined heating times.
6.1.6 Setting date and time
1.
Press and hold the setting wheel (E) in order to open the configuration menu.
2.
Select the symbol "
wheel.
48
" and confirm the selection by shortly pressing the setting